Bullish Shark pattern - Found at ENVOYTEX

Bullish Shark pattern - Found at ENVOYTEX

Shark

Shark pattern is a combination of a ‘failed’ wave, an extreme harmonic impulse wave and the famous 0.886 retrenchment.
RULES:
B point needs to be in range of XA projection – minimum 1.13 but NOT exceed 1.618
C point needs to be in range of AB projection – minimum 1.618 but NOT exceed 2.24
C point at 0.886 0X (not 0B) retrenchment or 1.13 0X projection
We have the freedom to choose swing 0X to create the most compact zone for C point.
2 elements define PRZ:

• 0.886 0X retrenchment (not OB) or 1.13 0X projection, which ever gives the most compact zone. Sometimes you would need to eye for both PRZ to see how the price reacts to each level and decide if you want to trade it.
• AB Projection

1)Bullish Shark pattern

 

In Figure 1, B point is at 1.13 XA Projection. The 2.0 AB projection and 0.886 0X retracement create a super compact zone for point C. The price gets rejected twice before the reversal begin. Take profit level of this pattern is at 50% BC retracement. As we will discuss about 5-0 pattern later, you will soon find out that Shark pattern is a part of a more complicated pattern which is 5-0. The green rectangle on the chart marks the PRZ of 5-0 pattern.

Figure 2 is an example where 0.886 retrenchment is quickly taken out when the price falls, which leaves us with another PRZ at 1.13 0X projection. Indeed, the price stabilizes in the PRZ formed by 2.0 AB projection and 1.13 0X projection. Price rallies shortly after stabilizing. Execution of this pattern is a bit hard and will be covered in another course. For now, just remember we need to keep our eyes open for both PRZ

BULLISH GARTLEY HARMONIC CHART PATTERN - Found at BDCOM

BULLISH GARTLEY HARMONIC CHART PATTERN

 - Found at  BDCOM

Bullish Gartley harmonic chart pattern suggests a buy order upon completion of the pattern. Here in the above image, XABCD is a bullish gartley harmonic chart pattern. In the first portion of the post, I am going to explain the way to find a bullish gartley harmonic chart pattern, and in the second portion of this post, I am going to explain the the way to apply the bullish gartley harmonic chart pattern.

 How to find a bullish gartley harmonic chart pattern?
To find the bullish gartley harmonic chart pattern on candle sticks chart, we have to go through the following steps. Firstly, we need to find the X and A points of bullish gartley harmonic chart pattern. X and A points are found at the bottom and top of a strong bullish trend respectively. Secondly, we have to confirm the point B of the pattern. To find the point B, draw a fibonacci retracement tool from point X to point A. Point B should be confirmed by the 61.8% fibonacci retracement level of XA, in other words XA/AB should be equal to the 0.618.

Now let's confirm the point C. To find the point C, draw a fibonacci retracement tool from point A to point B. The point C should be between the 38.2% and 88.6% fibonacci retracement levels of AB, in other words, AB/BC should be equal to the 0.382-0.886.
In this step, draw a fibonacci retracement tool from point B to point C to confirm the point D. Point D should be between the 113% and 161.8% fibonacci retracement level of BC, in other words, CD/BC should be equal to 1.13-1.618 range.
We can see in the previous step that the D is between the 1.13-1.618 range, but it does not accurately confirm point D. That is why, point D is reconfirmed here. To reconfirm point D, draw a fibonacci retracement tool from X to A. Point D should be at the 78.6% fibonacci retracement level of XA, in other words, XA/AD equal to 0.786.
Now we will draw the XA, XB, AB, BC, BD, and CD straight lines to find the bullish gartley harmonic chart pattern.

How to apply the bullish harmonic chart pattern in forex trading?
The technique is very simple. Just place a long order when the point D is confirmed. The stop loss for the order will be placed at the price level at point X. The profit target for the order should be placed at AC trend line.

Conservative profit target can be placed at the 50-61.8% fibonacci retracement level of CD. Some traders also take the advantages of trading at point B and C, but these need advance fundamental and sentiment analysis.
 

Understanding Gaps: Common, Breakaway, Runaway, and Exhaustion Gap রানওয়ে গ্যাপ , ব্রেকওয়ে গ্যাপ -- FORTUNE

Understanding Gaps: Common, Breakaway, Runaway, and Exhaustion Gap

রানওয়ে গ্যাপ , ব্রেকওয়ে গ্যাপ -- FORTUNE

IDLC is Trying to consume sell pressure

IDLC is Trying to consume sell pressure to days Trade is want to say , if its better perform next day with increasing Price and Volume a New hope is Remade . Price is move to Make a another Higher High ,

Symmetric Triangle - Found at EHL

 Symmetric Triangle - Found at  EHL

Symmetrical


Symmetrical triangles are formed when neither the bulls nor bears have an upper hand in a directionless market and can be identified when the stock makes lower highs and higher lows. If you connect these lower highs, you get a falling trend line. This resistance line is also known as supply line. Similarly, the uptrend line that is formed when you connect the higher lows is also known as support or demand line. The time taken to form this pattern is very important and usually takes 1-3 months. If it is formed in a smaller time frame, say 10-15 days, it is called a 'pennant'.


Though a symmetrical triangle is commonly considered a continuation pattern, there are instances when it acts as reversal pattern and, hence, one needs to wait for the final breakout. when the price goes above the resistance line or falls below the support line to identify the direction of next move. For instance, a breakout on the upside when the market is in an uptrend, can be considered a continuation pattern.



Since the trading range comes down during the formation of a symmetrical triangle, the chance of a false breakout is high (any increase in volatility can result in the price going above or below these lines). To avoid this, one needs to introduce strict breakout rules. First, the breakout has to occur on the basis of closing, which means that any intra-day penetration of lines is usually ignored. Some traders also apply the price-based rule, that is, the price should move at least 3% above or below the breakout point; or the time-based rule, that is, the price needs to close above or below the breakout points for three consecutive days. Like any other trading pattern, the breakout should be supported by volume, especially when it is an upward breakout.









An accelerated price movement, gap formation, etc, can also be considered as breakout confirmation. Once the breakout is confirmed, the next step is to identify the possible target price. This is arrived at by measuring the widest distance of the symmetrical triangle and adding/deducting this value to/from the final breakout point.

The ABCD pattern -MITHUNKNIT

The ABCD  pattern -MITHUNKNIT

We’ll start our study of the harmonic price patterns with the ABCD patterns. These patterns are as interesting as they sound and quite simple to grasp, if you have your Fibonacci concepts clear. ABCD patterns consist of 3 legs; AB, BC and CD, and can have some variations as explained follows:

The Classic ABCD pattern basically comprises three legs, a movement from A to B, a corrective move from B to C and a third leg from C to D.

The corrective move BC would generally retrace from B to the Fibonacci 61.8% retracement level at C. Next, the third leg CD would generally extend to the Fibonacci 127.2% extension level from BC to D. As mentioned in the above diagram the move from B to C can also be 78.6% retracement of AB and in such case CD could be 161.8% extension of the move from B to C.

The AB = CD pattern is a variation of the classical ABCD pattern and as the name suggests it has following characteristic:

• Move from C to D = Move from A to B.

• Time taken from the move from C to D = Time taken from A to B.

Please note that some sites would mention that the length AB needs to be equal to length CD. Please don't worry in case you are wondering about measuring those lengths on your trading charts. No one trades with a measuring tape in hand and what basically is to be seen is that the height from A to B (or the number of pips from A to B) need to be equal to height from C to D i.e. number of pips from C to D.

Trading with ABCD Pattern

Regardless of the type of the ABCD pattern, point D would be the point to enter trades depending if the pattern is bearish or bullish, as shown in the above diagram. The stop-loss can be slightly below the level of support or resistance.

In the bearish pattern on the left, you would sell at point D. You would buy at point D in the bullish pattern on the right.

The Harmonic Cypher pattern - NTLTUBES

The Harmonic Cypher pattern is visually an inverse pattern of the more common Butterfly harmonic pattern (read more about butterfly pattern). It is not as commonly occurring as the Butterfly pattern and is distinct by the strict rules that govern the Cypher harmonic pattern. The Cypher pattern was discovered and defined by Darren Ogles bee.

 

 

The chart below illustrates a bullish and a bearish Forex Cypher pattern.

Cypher Pattern – Rules

The Cypher pattern starts with a market price that establishes the X and A points. Once this leg is determined, the pattern evolves.

Point B retraces to 0.382 – 0.618 Fibonacci level of the leg XA

Point C is formed when prices extend the XA leg by at least 1.272 or within 1.130 – 1.414 Fibonacci extension level

Point D is formed when it retraces 0.782 Fibonacci level of XC

Point D is also where prices are expected to reverse

Targets are determined as 0.382 and 0.618 Fibonacci retrenchment levels of the CD leg

Stops losses are placed a few pips below or above the high or low of point X

Important points when trading the Cypher Pattern

The cypher forex pattern is not as common as other harmonic patterns such as Gartley’s or butterfly patterns

Although the occurrence of the cypher pattern is rare, it is by no means a pattern that offers a higher probability

Due to the rare occurrence of the cypher pattern, traders should make room for adjustments to the Fib levels

Waiting for the perfect cypher pattern will result in the trader watching the charts for a very long time with no valid set up occurring

The cypher pattern can occur on any time frame, but is best to use on H1 and higher

JMISMDL - Buy Suggestion

JMISMDL Buy Suggestion   

DSEX INDEX Expected Movement with Next Support

DSEX INDEX Expected Movement with Next Support 

NPOLYMAR Buy Suggestion

NPOLYMAR Buy Suggestion 

 

 

KAY&QUE Buy Suggestion

KAY&QUE Buy Suggestion 

 

 

ARAMITCEM Buy Suggestion

ARAMITCEM Buy Suggestion 

 

 

 

OAL Buy Suggestion

OAL Buy Suggestion

UPGDCL Buy Suggestion

UPGDCL  Buy Suggestion

 

টেকনিক্যাল এন্ড ফান্ডামেন্টাল দুটই সাপোর্ট করে , হিস্টরিকাল প্রাইচ ও সাপোর্ট করে , প্রাইচ অ্যাকশন সাপোর্ট করে , এবার আল্লাহ্‌ রহমত , মামুদের সু নজর এবং সদ ইচ্ছা দরকার ।
---- UPGDCL --
পিই - ৯.৫৬ বেইজ অন ১৮ মান্থ ইপিএস
সো ৪০ পিই তে এটার প্রাইচ কত থাকা উচিত ? ৬২২ টাকা ।
সেক্টর পিই ১৩.৩৯ , সেক্টর পিই অনুযায়ী প্রাইচ কত থাকা উচিত ? ২০৮ টাকা ।
মার্কেট পিই ১৪.৫৩ ,মার্কেট পিই অনুযায়ী প্রাইচ কত থাকা উচিত ? ২২৬ টাকা ।

বলেছিলাম এটা নিয়ে একটা গবেষণা করব , অবশেষে গবেষণাই যা বের হয়ে আসলো ... ফল প্রকাশ করা হল ।-- ইউপিজিডিসিএল নিয়ে ।
ডেভিডেন্ট গ্রোথ ঃ
২০১৩ সালে ৩৫ % ক্যাশ
২০১৪ সালে ৩০ % ক্যাশ ১০% স্টক
২০১৫ সালে ৮০ % ক্যাশ
২০১৬ সালে ১২৫ % ক্যাশ

ইপিএস গ্রোথ ঃ
২০১১ সালে ৫.৩৭
২০১২ সালে ১০.২১
২০১৩ সালে ৫.৯৮
২০১৪ সালে ৮.৩০
২০১৫ সালে ১৫.৫৭ ...

-- মার্কেট ডেল্টা

 

Using technical indicators

Forecasting and Trading with the Elliott Wave Principle

Swing trading system for Amibroker (AFL)

Swing trading system for Amibroker (AFL)

 function GetSecondNum()
{
    Time = Now( 4 );
    Seconds = int( Time % 100 );
    Minutes = int( Time / 100 % 100 );
    Hours = int( Time / 10000 % 100 );
    SecondNum = int( Hours * 60 * 60 + Minutes * 60 + Seconds );
    return SecondNum;
}

function PopupWindowEx( popupID, bodytext, captiontext, timeout, left, top )
{
    displayText = bodytext + captiontext;
    if ( ( StaticVarGetText( "prevPopup" + popupID ) != displayText) OR ( StaticVarGet( "prevPopupTime" + popupID ) < GetSecondNum() ) )
    {
        StaticVarSetText( "prevPopup" + popupID, displayText);
        StaticVarSet( "prevPopupTime" + popupID, GetSecondNum() + timeout );
        PopupWindow( bodytext, Captiontext + popupID, timeout, Left, top );
        Say("crossover.. action");
    }
}

_SECTION_BEGIN("EMA CROSSOVER");

SetTradeDelays(1,1,1,1);
SetPositionSize(150,spsShares);

 Buy = Cross(EMA(C,5), EMA(C,20));
 Sell = Cross(EMA(C,20),EMA(C,5));
 Buy = ExRem(Buy,Sell);
 Sell= ExRem(Sell,Buy);
 Short = Sell ;
 Cover = Buy ;
 Cover=ExRem(Cover,Short);
 Short=ExRem(Short,Cover);
 Filter= Cover OR Short;

AlertIf( Buy, "", "Buy @ " + C, 1 );
AlertIf( Sell, "", "Sell @ " + C, 2 );

for(i=BarCount-1;i>1;i--)
{
if(Buy[i] == 1)
{
entry = C[i];
sig = "Buy";

bars = i;
i = 0;
}
if(Sell[i] == 1)
{
sig = "Sell";
entry = C[i]; 
bars = i;
i = 0;
}
}
Offset = 20;

pxHeight = Status( "pxchartheight" ) ;

xx = Status( "pxchartwidth");

Left = 1100;

width = 310;

x = 5;

x2 = 238;

y = pxHeight;

GfxSelectPen( colorGreen, 1); // broader color

GfxRoundRect( x, y - 82, x2, y , 7, 7 ) ;
 
GfxTextOut( (" "),27,y-100);




_SECTION_END();

EMA2=EMA(C,2);
EMA4=EMA(C,4);
EMA8=EMA(C,8);
EMA17=EMA(C,17);
EMA34=EMA(C,34);
FMA1=(EMA2-EMA4)+EMA2;
FMA2=(EMA4-EMA8)+EMA4;
FMA4=(EMA8-EMA17)+EMA8;
FMA8=(EMA17-EMA34)+EMA17;
Plot(FMA4,"FMA4",colorGreen,styleThick);
Plot(FMA8,"FMA8",colorRed,styleThick);
Buy=FMA4>FMA8;
Sell=FMA4<FMA8;
Buy=ExRem(Buy,Sell);
Sell=ExRem(Sell,Buy);
BuyPrice=ValueWhen(Buy,C);
SellPrice=ValueWhen(Sell,C);
PlotShapes(shapeHollowUpArrow * Buy,colorBrightGreen,0,L, Offset=-45);
PlotShapes(shapeHollowDownArrow * Sell,colorRed,0,H, Offset=-45);
A=(H+L)/2;
var1=Wilders(A,34);
var2=Wilders(A,5);
var3=var2-var1;
var4=var3-Wilders(var3,5);
Var5=(H-L)/V;
AO=Var3;
AC=Var4;
barcolor=IIf(AO>Ref(AO,-1) AND AC>Ref(AC,-1),colorGreen,IIf(AO<Ref(AO,-1) AND AC<Ref(AC,-1),colorRed,IIf(V>0 AND Var5<Ref(Var5,-1) AND V>Ref(V,-1),colorGold,colorBlack)));
HaClose = (O+H+L+C)/4;
HaOpen = AMA( Ref( HaClose, -1 ), 0.5 );
HaHigh = Max( H, Max( HaClose, HaOpen ) );
HaLow = Min( L, Min( HaClose, HaOpen ) );
HaClose = ( HaClose + HaOpen + HaHigh + HaLow )/4;
Plot( C, "Regular candles " + Name(), barcolor, styleCandle );


duration = 10000000;

LastClose= Ref(C,-1);  

if (Buy[BarCount-2]==True)     
{
PopupWindowEx( "ID:1", "Get Ready to BUY  \n"+Name() + "  "+ Interval(2)+" :  "+ " Last ="+LastClose  , "Buy Alert -", 1000, 100, 1 ) ;  
}
if (Short[BarCount-2]==True) 
{
PopupWindowEx( "ID:2", "Get Ready to SHORT  \n"+Name() + "  "+ Interval(2) + "  :  "+ " Last ="+LastClose , "Short   Alert ", 1000, 1, 150 ) ;
}

_SECTION_BEGIN("Background text");
SetChartBkColor(colorBlack);
GraphXSpace=Param("GraphXSpace",10,-45,200,1);
C13=Param("fonts",20,10,30,1 );
C14=Param("left-right",2.1,1.0,5.0,0.1 );
C15=Param("up-down",12,1,20,1 );
Miny = Status("axisminy");
Maxy = Status("axismaxy");
lvb = Status("lastvisiblebar");
fvb = Status("firstvisiblebar");
pxwidth = Status("pxwidth");
pxheight = Status("pxheight");
GfxSetBkMode(transparent=1);
GfxSetOverlayMode(1);
GfxSelectFont("Candara", Status("pxheight")/C13 );
GfxSetTextAlign( 6 );
GfxSetTextColor( ColorRGB (217,217,213));
_SECTION_END();

_SECTION_BEGIN("BACKGROUD LTRS 1");
SetChartOptions(0,chartShowArrows|chartShowDates);
GfxSetOverlayMode(1);
GfxSetTextAlign( 6 );// center alignment
GfxSetTextColor( ParamColor("Text Color",colorSeaGreen));
GfxSetBkMode(0); // transparent
GfxSelectFont("arial narrow", Status("pxheight")/18);
_SECTION_END();

_SECTION_BEGIN("BACKGROUD LTRS 2");
GfxTextOut( Name(), Status("pxwidth")/2, Status("pxheight")/4.1);
GfxSetTextAlign( 6 );// center alignment
GfxSetTextColor( ParamColor("Text Color",colorDarkOliveGreen));
GfxSetBkMode(0); // transparent


_SECTION_BEGIN("BB price chart");
 SetChartOptions(0,chartShowArrows|chartShowDates);
 Plot( Close, "Close", ParamColor("Color", colorLightBlue ), styleNoTitle | ParamStyle("Style") | GetPriceStyle() );

 P = ParamField("Price field",-1);
 Periods = Param("Periods", 20, 2, 300, 1 );
 Width = Param("Width", 2, 0, 10, 0.05 );
 Color = ParamColor("Color", colorCycle );
 Style = ParamStyle("Style");

 if( ParamToggle("Plot BB price chart", "No,Yes", 1 ) )
 Plot( BBandTop( P, Periods, Width ), "BBTop" + _PARAM_VALUES(), Color, Style );
 if( ParamToggle("Plot BB price chart", "No,Yes", 1 ) )
 Plot( BBandBot( P, Periods, Width ), "BBBot" + _PARAM_VALUES(), Color, Style );
 _SECTION_END();

_SECTION_BEGIN("PSAR");
Plot(C,"",1,128);
acc = Param("Acceleration", 0.04, 0, 1, 0.001 );
accm = Param("Max. acceleration", 0.4, 0, 1, 0.001 );
if( ParamToggle("Plot PSAR", "No,Yes", 1 ) )
Plot( SAR( acc, accm ), _DEFAULT_NAME(), ParamColor( "Color", colorGold ), ParamStyle("Style", styleDots | styleNoLine, maskDefault | styleDots | styleNoLine ) );
_SECTION_END();

_SECTION_BEGIN("SMA crossover 200 ");
P = ParamField("Price field",-1);
Periods = Param("Periods", 200, 2, 300, 1, 10 );
if( ParamToggle("Plot SMA cross over 200", "No,Yes", 1 ) )
Plot( MA( P, Periods ), _DEFAULT_NAME(), ParamColor( "Color", colorRed ) );
 _SECTION_END();

_SECTION_BEGIN("SMA crossover 100 ");
P = ParamField("Price field",-1);
Periods = Param("Periods", 100, 2, 300, 1, 10 );
if( ParamToggle("Plot SMA cross over 100", "No,Yes", 1 ) )
Plot( MA( P, Periods ), _DEFAULT_NAME(), ParamColor( "Color", colorSeaGreen )  );
 _SECTION_END();

_SECTION_BEGIN("SMA crossover 50 ");
P = ParamField("Price field",-1);
Periods = Param("Periods", 50, 2, 300, 1, 10 );
if( ParamToggle("Plot SMA crossover 100", "No,Yes", 1 ) )
Plot( MA( P, Periods ), _DEFAULT_NAME(), ParamColor( "Color", colorTan) );
 _SECTION_END();


//Magfied Market Price

FS=Param("Font Size",23,11,100,1);

GfxSelectFont("Times New Roman", FS, 700, True );

GfxSetBkMode( colorWhite ); 

GfxSetTextColor( ParamColor("Color",colorSeaGreen) );

Hor=Param("Horizontal Position",640,1,1000,1);

Ver=Param("Vertical Position",14,1,830,1);

GfxTextOut(""+C, Hor , Ver );

YC=TimeFrameGetPrice("C",inDaily,-1);

DD=Prec(C-YC,2);

xx=Prec((DD/YC)*100,2);

GfxSelectFont("Times New Roman", 14, 700, True );

GfxSetBkMode( colorBlack ); 

GfxSetTextColor(ParamColor("Color",colorYellow) );

GfxTextOut(""+DD+"  ("+xx+"%)", Hor , Ver+45 );

_SECTION_END();


_SECTION_BEGIN("BREAK OUTS");

//  ============== Standard Chart Code ============================
Code = "Modified @ FazalHaq";
SetFormulaName("Volume Breakouts");

//   ---------------  Controls for Chart Display  ----------------------------------
SetChartOptions(0, chartShowDates | chartWrapTitle);
if (ParamToggle("Tooltip shows", "All Values|Only Prices"))
{
  ToolTip = StrFormat("Open: %g\nHigh:  %g\nLow:   %g\nClose:  %g (%.1f%%) \nVolume: " + NumToStr(V, 1), O, H, L, C, SelectedValue(ROC(C, 1)));
}

space = Param("Space on Chart", 2,  - 15, 50, 1);
GraphXSpace = space;
SetChartBkColor(ParamColor("Background Color", colorBlack));

// =================   (with Lookback and Shift default set to his specs) =================

H0 = H;
L0 = L;
C0 = C;
O0 = O;

Lookback = Param("LookBack", 10, 10, 50, 1); // Default for interday commodity currency trading
shift = Param("Shift", 5, 1, 50, 1); // ?
x0 = LastValue(Cum(1));
x1 = x0 - shift;
H = Ref(H,  - shift + 1);
L = Ref(L,  - shift + 1);
H1 = LastValue(Ref(HHV(H, Lookback),  - 1));
L1 = LastValue(Ref(LLV(L, Lookback),  - 1));

if( ParamToggle("Plot BREAK OUTS", "No,Yes", 1 ) )
Plot(H1, "H1", colorSkyblue);
if( ParamToggle("Plot BREAK OUTS", "No,Yes", 1 ) )
Plot(L1, "L1", colorSkyblue);

H = H0;
L = L0;
C = C0;
O = O0;

up = Cross(H, H1)AND Cum(1) > x1;
dn = Cross(L1, L)AND Cum(1) > x1;

_SECTION_END();

_SECTION_BEGIN("HeikenAshiSmoothed");
GraphXSpace=2;
//p=45;
p = Param("p",70,2,100,1);

Om=DEMA(O,p);
hm=DEMA(H,p);
lm=DEMA(L,p);
Cm=DEMA(C,p);
HACLOSE=(Om+Hm+Lm+Cm)/4;
HaOpen = AMA( Ref( HaClose, -1), 1);
HaHigh = Max( Hm, Max( HaClose, HaOpen ) );
HaLow = Min( Lm, Min( HaClose, HaOpen ) );

Color=IIf(HaClose >= HaOpen,colorSeaGreen,ColorRGB( 205, 92, 92 ) );
if( ParamToggle("Plot Heikin-Ashi", "No,Yes", 0 ) )
PlotOHLC( HaOpen, HaOpen, HaClose, HaClose, "" + Name(), Color, styleCandle); 
_SECTION_END();


_SECTION_BEGIN("TREND LINES");

/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    THIS SECTION DRAWS TD TREND LINES */

percent  = 0.01 * 1; /* Adjust this percent as necessary, I use .01 because
FOREX is a 0.0000 number */
firstpointL = 2;
firstpointH = 2;

y0=LastValue(Trough(L,percent,firstpointL));
y1=LastValue(Trough(Ref(L,-1),percent,1));

for( i = 1; i < BarCount AND y0 >= y1; i++ )
{
       
        firstpointL++;   
        y0=LastValue(Trough(L,percent,firstpointL));       
}

x0=BarCount - 1 - LastValue(TroughBars(L,percent,firstpointL));
x1=BarCount - 1 - LastValue(TroughBars(Ref(L,-1),percent,1));
LineL = LineArray( x0, y0, x1, y1, 1 );
/*
Plot(C, "C", colorBlack, styleCandle);
*/
if( ParamToggle("Plot TREND LINES", "No,Yes", 0 ) )
Plot( LineL, " Support Trend line", colorWhite,4 +8 );


yt0=LastValue(Peak(H,percent,firstpointH));
yt1=LastValue(Peak(Ref(H,-1),percent,1));

for(i = 1; i < BarCount AND yt0 <= yt1; i++ )
{
       
        firstpointH++;       
        yt0=LastValue(Peak(H,percent,firstpointH));
}
xt0=BarCount - 1 - LastValue(PeakBars(H,percent,firstpointH));
xt1=BarCount - 1 - LastValue(PeakBars(Ref(H,-1),percent,1));
LineH = LineArray( xt0, yt0, xt1, yt1, 1 );

if( ParamToggle("Plot TREND LINES", "No,Yes", 0 ) )
Plot( LineH, "Resistance Trend line", colorGold,4 + 8 );


/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/

_SECTION_END();

_SECTION_BEGIN("Fib Retracements");
    fibs = ParamToggle("Plot Fibs","Off|On",0);
    pctH = Param ("Pivot Hi %", 0.325,0.001,2.0,0.002);
    HiLB = Param ("Hi LookBack",1,1,BarCount-1,1);
    pctL = Param ("Pivot Lo %", 0.325,0.001,2.0,0.002);
    LoLB = Param ("Lo LookBack",1,1,BarCount-1,1);
    Back = Param ("Extend Left = 2",1,1,500,1);
    Fwd  = Param("Plot Forward", 0, 0, 500, 1);
    text = ParamToggle("Plot Text","Off|On",0);
    hts  = Param ("Text Shift", -33.5,-50,50,0.10);
    style =ParamStyle("Line Style",styleLine,styleNoLabel);
x = BarIndex();
pRp  = PeakBars( H, pctH, 1) == 0;
yRp0 = SelectedValue(ValueWhen( pRp, H, HiLB));
xRp0 = SelectedValue(ValueWhen( pRp, x, HiLB));
pSp  = TroughBars( L, pctL, 1) == 0;
ySp0 = SelectedValue(ValueWhen( pSp, L, LoLB));
xSp0 = SelectedValue(ValueWhen( pSp, x, LoLB));
Delta = yRp0 - ySp0;

function fib(ret)
{
retval = (Delta * ret);
Fibval = IIf(ret < 1.0
AND xSp0 < xRp0, yRp0 - retval, IIf(ret < 1.0
AND xSp0 > xRp0, ySp0 + retval,IIf(ret > 1.0
AND xSp0 < xRp0, yRp0 - retval, IIf(ret > 1.0
AND xSp0 > xRp0, ySp0 + retval, Null))));
return FibVal;
}

x0 = Min(xSp0,xRp0)-Back;
x1 = (BarCount -1);
//////////////////////////////////////////////////////////////////
r236 = fib(0.236);  r236I = LastValue (r236,1);
r382 = fib(0.382);  r382I = LastValue (r382,1);
r050 = fib(0.50);       r050I = LastValue (r050,1);
r618 = fib(0.618);  r618I = LastValue (r618,1);
r786 = fib(0.786);  r786I = LastValue (r786,1);
e127 = fib(1.27);       e127I = LastValue (e127,1);
e162 = fib(1.62);       e162I = LastValue (e162,1);
e200 = fib(2.00);       e200I = LastValue (e200,1);
e262 = fib(2.62);       e262I = LastValue (e262,1);
e424 = fib(4.24);       e424I = LastValue (e424,1);
//////////////////////////////////////////////////////////////////
p00 = IIf(xSp0 > xRp0,ySp0,yRp0);    p00I = LastValue (p00,1);
p100 = IIf(xSp0 < xRp0,ySp0,yRp0);   p100I = LastValue (p100,1);
color00 =IIf(xSp0 > xRp0,colorLime,colorRed);
color100 =IIf(xSp0 < xRp0,colorLime,colorRed);
//////////////////////////////////////////////////////////////////
numbars = LastValue(Cum(Status("barvisible")));
fraction= IIf(StrRight(Name(),3) == "", 3.2, 3.2);
//////////////////////////////////////////////////////////////////
if(fibs==1)
{
Plot(LineArray(xRp0-Fwd,yRp0,x1,yRp0,Back),"PR",32,8|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(xSp0-Fwd,ySp0,x1,ySp0,Back),"PS",27,8|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r236,x1,r236,Back),"",45,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r382,x1,r382,Back),"",44,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r050,x1,r050,Back),"",41,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r618,x1,r618,Back),"",43,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r786,x1,r786,Back),"",42,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e127,x1,e127,Back),"e127",47,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e162,x1,e162,Back),"e162",47,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e200,x1,e200,Back),"p200",47,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e262,x1,e262,Back),"p262",47,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e424,x1,e424,Back),"p424",25,style|styleNoRescale,Null, Null,Fwd);
}
//////////////////////////////////////////////////////////////////
if(text==1)
{
PlotText(" 0% = " + WriteVal(p00,fraction),     LastValue(BarIndex())-(numbars/hts), p00I  + 0.05, color00);
PlotText("23% = " + WriteVal(r236,fraction), LastValue(BarIndex())-(numbars/hts), r236I + 0.05, 45);
PlotText("38% = " + WriteVal(r382,fraction), LastValue(BarIndex())-(numbars/hts), r382I + 0.05, 44);
PlotText("50% = " + WriteVal(r050,fraction), LastValue(BarIndex())-(numbars/hts), r050I + 0.05, 41);
PlotText("62% = " + WriteVal(r618,fraction), LastValue(BarIndex())-(numbars/hts), r618I + 0.05, 43);
PlotText("78% = " + WriteVal(r786,fraction), LastValue(BarIndex())-(numbars/hts), r786I + 0.05, 42);
PlotText("100% = " + WriteVal(p100,fraction), LastValue(BarIndex())-(numbars/hts),p100I + 0.05, color100);
PlotText("127% = " + WriteVal(e127,fraction), LastValue(BarIndex())-(numbars/hts),e127I + 0.05, 47);
PlotText("162% = " + WriteVal(e162,fraction), LastValue(BarIndex())-(numbars/hts),e162I + 0.05, 47);
PlotText("200% = " + WriteVal(e200,fraction), LastValue(BarIndex())-(numbars/hts),e200I + 0.05, 47);
PlotText("262% = " + WriteVal(e262,fraction), LastValue(BarIndex())-(numbars/hts),e262I + 0.05, 47);
PlotText("424% = " + WriteVal(e424,fraction), LastValue(BarIndex())-(numbars/hts),e424I + 0.05, 25);
}
_SECTION_END();


_SECTION_BEGIN("Pivot Points,Daily,Monthly");

TimeFrameSet(inDaily);
DayH= LastValue(Ref(H,-1));
DayL= LastValue(Ref(L,-1));
DayC= LastValue(Ref(C,-1));
TimeFrameRestore();

//Daily
PP = (DayL + DayH + DayC)/3;
R1  =  (2 * PP) - DayL;
S1  =  (2 * PP)  - DayH;
R2  =  PP + (DayH - DayL);
S2  =  PP - (DayH - DayL);
R3 = DayH + 2*(PP - DayL);
S3 = DayL - 2*(DayH - PP);

TimeFrameSet(inMonthly);
MonthH= LastValue(Ref(H,-1));
MonthL= LastValue(Ref(L,-1));
MonthC= LastValue(Ref(C,-1));
TimeFrameRestore();

//Monthly
MPP = (MonthL + MonthH + MonthC)/3;
MR1  =  (2 * MPP) - MonthL;
MS1  =  (2 * MPP)  - MonthH;
MR2  =  MPP + (MonthH- MonthL);
MS2  =  MPP - (MonthH- MonthL);
MR3  =  MonthH + 2*(MPP - MonthL);
MS3 =   MonthL - 2*(MonthH- MPP);

SHOWDPIVOTS = ParamToggle("Daily Pivots", "No|Yes",0);
SHOWMPIVOTS = ParamToggle("Monthly Pivots","No|Yes",0);
SHOW3 = ParamToggle("3rd Line", "No|Yes",0);

   
for (i=BarCount-2;i>(BarCount-13);i--)//set the last bars to the final PP value
{
    PP[i] = PP[BarCount-1];
    R1[i] = R1[BarCount-1];
    R2[i] = R2[BarCount-1];
    S1[i] = S1[BarCount-1];
    S2[i] = S2[BarCount-1];

    ColorG[i] = colorGreen;
    ColorB[i] = colorBlue;
    ColorR[i] = colorRed;
}

//
// Conceal all but the trailing portion of the line
//
for (i=0;i<BarCount-15;i++) //hide the line except most recent 15 bars
{
    ColorR[i] = ColorG[i] = ColorB[i] = colorDarkGrey;
}


if (SHOWDPIVOTS) {
Plot(R2, "R2",ColorG);
Plot(R1, "R1",ColorG);
Plot(PP, "PP",ColorB);
Plot(S1, "S1",ColorR);
Plot(S2, "S2",ColorR);
}

if (SHOWDPIVOTS & SHOW3)
{
        Plot(S3, "S3",ColorR);
        Plot(R3, "R3",ColorG);
}



if (SHOWMPIVOTS) {
Plot(MPP, "MPP",ColorB);
Plot(MR1, "MR1",ColorG);
Plot(MS1, "MS1",ColorR);
Plot(MS2, "MS2",ColorR);
Plot(MR2, "MR2",ColorG);
}

if (SHOWMPIVOTS & SHOW3)
{
        Plot(MR3, "MR3",ColorG);
        Plot(MS3, "MS3",ColorR);
}

_SECTION_END();

 _SECTION_BEGIN("Elliot wave");
 X=BarIndex();
 p=Param("p",5,5,30,1);
 z=Zig(C,p);Plot(C,"C",2,64);
CONDP=PeakBars(C,P)==0;SP=Cum(CONDP);
 EP1=ValueWhen(CONDP,C,1);TP1=ValueWhen(CONDP,X,1);
 EP2=ValueWhen(CONDP,C,2);TP2=ValueWhen(CONDP,X,2);
 EP3=ValueWhen(CONDP,C,3);TP3=ValueWhen(CONDP,X,3);
 EP4=ValueWhen(CONDP,C,4);TP4=ValueWhen(CONDP,X,4);
 CONDT=TroughBars(C,P)==0;ST=Cum(CONDT);
 ET1=ValueWhen(CONDT,C,1);TT1=ValueWhen(CONDT,X,1);
 ET2=ValueWhen(CONDT,C,2);TT2=ValueWhen(CONDT,X,2);
 ET3=ValueWhen(CONDT,C,3);TT3=ValueWhen(CONDT,X,3);
 ET4=ValueWhen(CONDT,C,4);TT4=ValueWhen(CONDT,X,4);
 ET5=ValueWhen(CONDT,C,5);TT5=ValueWhen(CONDT,X,5);

 // EW definition
 EW8=EP3>EP4 AND EP2>EP3 AND EP2>EP1 AND ET4>ET5 AND ET3>ET2 AND
 ET2>ET1 AND ET3>ET4 AND ET4>ET5 AND CONDT;
 COLOR=colorWhite;

 PlotShapes(shapeDigit8*EW8,color);
 G=Cum(CONDP OR CONDT);
 GEW=SelectedValue(ValueWhen(EW8,G));
 for(n=1;n<=9;n++)
 {
 PlotShapes((49-(2*n-(n%2)))*(G==GEW-n AND (n%2)*CONDP+(-1+n%2)
 *CONDT),Color);
 }
 Plot(EW8,"",colorRed,2+styleOwnScale);
 if( ParamToggle("Plot Elliot Wave", "No,Yes", 0) )
 Plot(z,"",colorPink );
 Filter=EW8;// explore for all quotations
 AddColumn(C,"C");
 GraphXSpace=8;
 _SECTION_END();

_SECTION_BEGIN("Title");

DODay = TimeFrameGetPrice("O", inDaily);
DHiDay = TimeFrameGetPrice("H", inDaily);
DLoDay = TimeFrameGetPrice("L", inDaily);

Title = EncodeColor(colorWhite)+""+EncodeColor(colorWhite)+ Name() + ", " + Interval(2) + ", " + Date() +
EncodeColor(colorWhite)   +  "\nO " + EncodeColor(colorWhite) + O +

 ",   H :  "   + H +
 ",   L  :  " + L +
 ",   C  :  "  + C +
EncodeColor(colorYellow)+ "\nDay-Open : " +DODay + "  Day-High : " +DHiDay + "  Day-Low : " + DLoDay ;
_SECTION_END();

_SECTION_BEGIN("Linear Reg Channel");
//Plot(Close, "", 55, GetPriceStyle());
P        = ParamField("Price field", -1);
Daysback = Param("Period for Linear Regression Channel", 50, 1, 300, 1);
SDP1     = Param("Standard Deviation 1", 1.0, 0, 6, 0.05);
SDP2     = Param("Standard Deviation 2", 2.0, 0, 6, 0.05);
SDP3     = Param("Standard Deviation 3", 3.0, 0, 6, 0.05);
ext      = Param("extend Linear Regression Channel", 15, 0, 50, 1);
shift    = Param("Look back period", 0, 0, 240, 1);
Collg    = ParamColor("Color Linear Reg Line", colorRed);
Colsd1   = ParamColor("Color StDev 1", colorBlue);
Colsd2   = ParamColor("Color StDev 2", colorLime);
Colsd3   = ParamColor("Color StDev 3", colorGold);
SDP1     = SDP1/2;
SDP2     = SDP2/2;
SDP3     = SDP3/2;
pds      = Daysback;
x        = BarIndex() + 1;
sx       = SelectedValue(x)-shift;
aa       = SelectedValue(Ref(LinRegIntercept(P, pds), -shift));
bb       = SelectedValue(Ref(LinRegSlope(P, pds), -shift));
StDev0   = StDev(P, pds);
fd1      = SelectedValue(Ref(SDP1 * StDev0, -shift) );
fd2      = SelectedValue(Ref(SDP2 * StDev0, -shift) );
fd3      = SelectedValue(Ref(SDP3 * StDev0, -shift) );
ys       = SelectedValue(ValueWhen(x, aa, 1));
yi       = SelectedValue(ValueWhen(x, bb, 1));
xs       = sx - pds;
d        = ext;//Shift Line Right
xe       = xs + pds + d;
ye       = ys + yi * (xe - xs);
sty      = 1|32|2048;
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys,xe-d,ye,1),"",Collg,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys-fd1,xe-d,ye-fd1,1),"",Colsd1,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys+fd1,xe-d,ye+fd1,1),"",Colsd1,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys-fd2,xe-d,ye-fd2,1),"",Colsd2,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys+fd2,xe-d,ye+fd2,1),"",Colsd2,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys-fd3,xe-d,ye-fd3,1),"",Colsd3,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys+fd3,xe-d,ye+fd3,1),"",Colsd3,sty,0,0,d);
_SECTION_END();


_SECTION_BEGIN("Fazal's Pivot Points");

//---------------------------------------------------------------------------
// This section gets whether they want pivot level for intraday or thier eod
//---------------------------------------------------------------------------

_N(ioreod =ParamList("Pivot Levels for ",  "Intraday|EOD"));

if (ioreod=="Intraday")
    {
        yh = TimeFrameGetPrice( "H", inDaily, -1 );
        yl = TimeFrameGetPrice( "L", inDaily, -1 );
        yc = TimeFrameGetPrice( "C", inDaily, -1 );
    }
else
    {
        yh = TimeFrameGetPrice( "H", inDaily, 0 );
        yl = TimeFrameGetPrice( "L", inDaily, 0 );
        yc = TimeFrameGetPrice( "C", inDaily, 0 );
    }

//---------------------------------------------------------------------------
//                         To calculate the Pivot Levels
//---------------------------------------------------------------------------

to = TimeFrameGetPrice( "O", inDaily, 0 );
pivot = (yh + yl + yc) / 3;
range = yh - yl;
_N(pist =ParamList("Select Pivot Type ", "Classical Pivot|Woodie Pivot|Caramilla Pivot|Fibonacci Pivot"));

if (pist =="Classical Pivot" )
    {
        r1 = (2 * pivot) - yl ;
        s1 = (2 * pivot) - yh ;
        r2 = pivot - s1 + r1;
        s2 = pivot - (r1 - s1) ;
        r3 = 2 * (pivot - yl) + yh ;
        s3 = yl - (2 * (yh - pivot));
    }

else if(pist =="Woodie Pivot" )
    {
        pivot = (yh + yl + yc + to) / 4;
        r1 = (2 * pivot) - yl;
        r2 = pivot + range;
        r3 = yh + 2 * (pivot - yl);
        r4 = r3 + range;
        s1 = (2 * pivot) - yh;
        s2 = pivot - range;
        s3 = yl - 2 * (yh - pivot);
        s4 = S3 - range;
    }

else if(pist =="Caramilla Pivot" )
    {
        r4 = yc + range * 1.1/2;
        r3 = yc + range * 1.1/4;
        r2 = yc + range * 1.1/6;
        r1 = yc + range * 1.1/12;
        s1 = yc - range * 1.1/12;
        s2 = yc - range * 1.1/6;
        s3 = yc - range * 1.1/4;
        s4 = yc - range * 1.1/2;
    }

else
    {
        r3 = pivot + 1.000 * (yh - yl);
        r2 = pivot + 0.618 * (yh - yl);
        r1 = pivot + 0.382 * (yh - yl);
        s1 = pivot - 0.382 * (yh - yl);
        s2 = pivot - 0.618 * (yh - yl);
        s3 = pivot - 1.000 * (yh - yl);
    }

//---------------------------------------------------------------------------
//                         To Plot Pivot Levels in the screen
//---------------------------------------------------------------------------

_N(dsr =ParamList("Draw Intraday Pivot Levels ",  "None|Both|Support|Resistance"));

if (dsr =="Support" OR  dsr == "Both")
{
    Plot(pivot, "\n Pivot - ",colorWhite,1);
    Plot(r1, "Resistance 1 - ",colorYellow,1);
    Plot(r2, "Resistance 2 - ",colorYellow,1);
    Plot(r3, "Resistance 3 - ",colorYellow,1);
    Plot((pivot+r1)/2, "Mid Value of R1 & Pivot  ",colorYellow,1);
    Plot((r3+r2)/2, "Mid Value of R2 & R3 -  ",colorYellow,1);
    Plot((r1+r2)/2, "Mid Value of R1 & R2 - ",colorYellow,1);
}

if( dsr == "Resistance" OR  dsr == "Both")
{
    Plot(pivot, "\n Pivot - ",colorWhite,1);
    Plot(s3, "Support 2 - ",colorYellow,1);
    Plot(s2, "Support 2 - ",colorYellow,1);
    Plot(s1, "Support 1 - ",colorYellow,1);
    Plot((s3+s2)/2, "Mid Value of S2 & S3 ",colorYellow,1);
    Plot((s1+s2)/2, "Mid Value of S1 & S2 -  ",colorYellow,1);
    Plot((pivot+s1)/2, "Mid Value of S1 & Pivot  ",colorYellow,1);
}

//---------------------------------------------------------------------------
//                 Printing the pivot level in interpretation window
//---------------------------------------------------------------------------


printf(Name()+ "\n\nResistance - 3  |  %g\nResistance - 2  |  %g\nResistance - 1  |  %g\n" +
"Pivot                |  %g\nSupport - 1      |  %g\nSupport - 2      |  %g\nSupport - 3      |  %g",
r3,r2,r1,pivot,s1,s2,s3);


//---------------------------------------------------------------------------
//                         This section is for Exploration
//---------------------------------------------------------------------------

Filter = 1;
AddColumn(r3,"Resistance 3");
AddColumn(r2,"Resistance 2");
AddColumn(r1,"Resistance 1");
AddColumn(Pivot,"Pivot");
AddColumn(s1,"Support 1");
AddColumn(s2,"Support 2");
AddColumn(s3,"Support 3");

//---------------------------------------------------------------------------
//                         Add Pivot levels along with the title
//---------------------------------------------------------------------------

_N(Title = EncodeColor(colorLime)+ StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} Open %g, Hi %g, Lo %g, Close %g(%.1f%%)\n"+
    EncodeColor(colorYellow)+"Resistance 3 -=- %g ::::: Resistance 2 -=- %g ::::: Resistance 1 -=- %g :::::"+
    EncodeColor(colorWhite)+" Pivot -=- %g"+
    EncodeColor(colorWhite)+"\nSupport 1 -=- %g ::::: Support 2 -=- %g ::::: Support 3 -=- %g\n ",
 O, H, L, C,SelectedValue( ROC( C, 1 ) ),r3,r2,r1,pivot,s1,s2,s3));

//---------------------------------------------------------------------------
//                                 End of Pivot Point
//---------------------------------------------------------------------------

_SECTION_END();

How to open a Payoneer account and get MasterCard with $25 bonus

If you are residing in Bangladesh and work the world wide company  wishes to own a U.S bank account or wanting to setup a Payoneer Debit MasterCard.  Payoneer is the easiest way to receive money from any other country in the world.  .As a resident of Bangladesh (or any other country) you can own a U.S Checking Account that provides you with a US collection account that can be used to receive payments from US companies directly to your Payoneer account. This payment can be withdrawn using your Payoneer MasterCard.By using the Master Card u can transfer money to your own account in Bangladesh. The card makes it easy and convenient to perform various transactions online such as purchasing or paying for services online and can be used in any ATM globally that accept MasterCard. The Payoneer Debit MasterCard can be acquired simply by creating an account on the Payoneer website. But the easiest method to get your account approved and verified is going through a third party.You can receive payment from various ads network also u can your facebook boost your post or page.

Requirements: 

1. A Valid Email Address – Create a Gmail
2. A scanned copy of a government-issued ID (any of Driving licence, Passport, National ID or Voter’s Card will be fine)

 Sign Up to Payoneer Account:

1. Go to Payoneer website  (Click Here)
2. 
3. Fill up your name email and pass word
4. Click next & fill up contact details
5. Click next & fill up security details
6. Then Almost will finish and your account will be created

Setting Up your Payoneer Debit MasterCard:

I believe you have already setup your email address and created a Payoneer account.

At this point a confirmation message will be sent to your email. Sit back and wait for 2-5 business days for your Payoneer account to be reviewed and approved.

Once your account is approved you will receive a congratulation email!

 

Your Payoneer Debit MasterCard will arrive your mailing address within 5 weeks. Once you receive it, you can proceed to your Payoneer account to view your status and activate your card.

Setting Up your U.S Bank Account: 

A free U.S checking account will be created for you the moment your debit MasterCard request is approved. This account is used to receive payments from US companies directly to your Payoneer account.
Check your email inbox for an email from c.support@payoneer.com containing the following message:

Dear FirstName,
Welcome to the Payoneer US Payment Service.
This service provides you with a US collection account that can be used to receive payments from US companies directly to your Payoneer account!
Your US Payment Service information:
BANK NAME: Bank Of America
ACCOUNT TYPE: CHECKING
ACCOUNT #: ***-***-***-***-***-***
ABA # (Bank Routing Number): ####-#####
Please Note: Your US Payment Service has not yet been verified. In order to ensure that payments you receive are funded to your account without delay, you’ll need to verify your service by completing the following steps:
Click here to complete the US Payment Service Questionnaire
Click here to submit a copy of your government-issued photo ID

Kindly, follow the links provided in the email to submit your US Payment Questionnaire and a scanned copy of your government-issued photo ID respectively.
Wait for a message similar to this one:
Congratulations! Your U.S Bank Account is ready to be used. You can use this account to receive funds from various U.S co-operation including Paypal and Amazon.

পাসওয়ার্ড জানলেও ঢুকতে পারবেনা আপনার ফেসবুকে ! জেনে নিন কি ভাবে??

বর্তমান সময়ে ফেসবুক এখন অনেক স্পর্শকাতর বিষয় অনেকের জন্য। অনেক গুরুত্বপূর্ণ ও ব্যক্তিগত বিষয় নিয়ে সমৃদ্ধ আপনার ফেসবুক একাউন্টটি যদি হ্যাক হয়ে যায় আপনার এর থেকে বড় বিপদ আর কি হতে পারে বলুন? আজ জানবেন কিভাবে আপনি আপনার ফেসবুক পাসওয়ার্ড হ্যাক হলেও আইডি রক্ষা করতে পারবেন।

আপনার ফেসবুকের পাসওয়ার্ড যদি সবাই জেনে যায়, তাহলেও কেউ আপনার অ্যাকাউন্টে প্রবেশ করতে পারবে না। অবিশ্বাস্য মনে হচ্ছে? না এটি বাস্তব, তবে এর জন্য প্রথমে আপনাকে যা করতে হবে, ফেসবুকে লগইন করে ওপরে ডান পাশে Home এর পাশে অ্যারোতে ক্লিক করে Account Settings-এ ক্লিক করুন।

এবার এখানে বাঁ পাশ থেকে ক্লিক করুন। এখন এর ডান পাশ থেকে ক্লিক করুন। তারপর এই ঘরে টিক চিহ্ন দিন। টিক চিহ্ন দেয়ার সময় নতুন একটি বার্তা এলে ক্লিক করুন। এখন বক্সে আপনার মোবাইল নম্বর লিখে Continue তে ক্লিক করুন। আপনার মোবাইলে একটি কোড নম্বর আসবে। কোড নম্বরটি কোড বক্সে লিখে Submit Code বাটনে ক্লিক করে Close-এ ক্লিক করুন। Login Notifications-এর ডান পাশ থেকে edit-এ ক্লিক করে Email এবং Text message বক্সেও টিকচিহ্ন দিয়ে Save-এ ক্লিক করে রাখতে পারেন। এতে ইমেইলে আপনার কোড সেন্ড হবে। এখন ফেসবুক অ্যাকাউন্ট লগআউট করে পুনরায় আবার ফেসবুকে লগইন করুন। দেখবেন Name New Device নামে একটি পেজ এসেছে। সেখানে Device name বক্সে কোনো নাম লিখে Save Device-এ ক্লিক করুন।

ব্যাস হয়ে গেলো! এখন থেকে থেকে প্রতিবার আপনার কম্পিউটার ছাড়া অন্য কারও কম্পিউটার থেকে আপনার ফেসবুক অ্যাকাউন্টে লগইন করতে চাইলে আপনার মোবাইলে একটি কোড নম্বর আসবে এবং সেই কোড নম্বরটি কোড বক্সে লিখে Continue তে ক্লিক করলেই আপনার ফেসবুক অ্যাকাউন্টে প্রবেশ করা যাবে। কাজেই আপনার ফেসবুকের পাসওয়ার্ড সবাই জানলেও কেউ আপনার ফেসবুকে লগইন করতে পারবে না

Swing trading system for Amibroker

 function GetSecondNum()
{
    Time = Now( 4 );
    Seconds = int( Time % 100 );
    Minutes = int( Time / 100 % 100 );
    Hours = int( Time / 10000 % 100 );
    SecondNum = int( Hours * 60 * 60 + Minutes * 60 + Seconds );
    return SecondNum;
}

function PopupWindowEx( popupID, bodytext, captiontext, timeout, left, top )
{
    displayText = bodytext + captiontext;
    if ( ( StaticVarGetText( "prevPopup" + popupID ) != displayText) OR ( StaticVarGet( "prevPopupTime" + popupID ) < GetSecondNum() ) )
    {
        StaticVarSetText( "prevPopup" + popupID, displayText);
        StaticVarSet( "prevPopupTime" + popupID, GetSecondNum() + timeout );
        PopupWindow( bodytext, Captiontext + popupID, timeout, Left, top );
        Say("crossover.. action");
    }
}

_SECTION_BEGIN("EMA CROSSOVER");

SetTradeDelays(1,1,1,1);
SetPositionSize(150,spsShares);

 Buy = Cross(EMA(C,5), EMA(C,20));
 Sell = Cross(EMA(C,20),EMA(C,5));
 Buy = ExRem(Buy,Sell);
 Sell= ExRem(Sell,Buy);
 Short = Sell ;
 Cover = Buy ;
 Cover=ExRem(Cover,Short);
 Short=ExRem(Short,Cover);
 Filter= Cover OR Short;

AlertIf( Buy, "", "Buy @ " + C, 1 );
AlertIf( Sell, "", "Sell @ " + C, 2 );

for(i=BarCount-1;i>1;i--)
{
if(Buy[i] == 1)
{
entry = C[i];
sig = "Buy";

bars = i;
i = 0;
}
if(Sell[i] == 1)
{
sig = "Sell";
entry = C[i];
bars = i;
i = 0;
}
}
Offset = 20;

Clr = IIf(sig == "Buy", colorLime, colorRed);
for (i=bars; i <BarCount;i++)
{
PlotText(""+sig+"@"+entry, BarCount-3,entry,Null,colorBlue);
}

messageboard = ParamToggle("Message Board","Show|Hide",1);
if (messageboard == 1 )
{

GfxSelectFont( "Tahoma", 13, 100 );
GfxSetBkMode( 1 );
GfxSetTextColor( colorWhite );

if ( sig =="Buy")
{
GfxSelectSolidBrush( colorDarkGreen ); // this is the box background color
}
else
{
GfxSelectSolidBrush( colorDarkRed ); // this is the box background color
}
pxHeight = Status( "pxchartheight" ) ;

xx = Status( "pxchartwidth");

Left = 1100;

width = 310;

x = 5;

x2 = 238;

y = pxHeight;


}

_SECTION_END();

EMA2=EMA(C,2);
EMA4=EMA(C,4);
EMA8=EMA(C,8);
EMA17=EMA(C,17);
EMA34=EMA(C,34);
FMA1=(EMA2-EMA4)+EMA2;
FMA2=(EMA4-EMA8)+EMA4;
FMA4=(EMA8-EMA17)+EMA8;
FMA8=(EMA17-EMA34)+EMA17;
Plot(FMA4,"FMA4",colorGreen,styleThick);
Plot(FMA8,"FMA8",colorRed,styleThick);
Buy=FMA4>FMA8;
Sell=FMA4<FMA8;
Buy=ExRem(Buy,Sell);
Sell=ExRem(Sell,Buy);
BuyPrice=ValueWhen(Buy,C);
SellPrice=ValueWhen(Sell,C);
PlotShapes(shapeHollowUpArrow * Buy,colorBrightGreen,0,L, Offset=-45);
PlotShapes(shapeHollowDownArrow * Sell,colorRed,0,H, Offset=-45);
A=(H+L)/2;
var1=Wilders(A,34);
var2=Wilders(A,5);
var3=var2-var1;
var4=var3-Wilders(var3,5);
Var5=(H-L)/V;
AO=Var3;
AC=Var4;
barcolor=IIf(AO>Ref(AO,-1) AND AC>Ref(AC,-1),colorGreen,IIf(AO<Ref(AO,-1) AND AC<Ref(AC,-1),colorRed,IIf(V>0 AND Var5<Ref(Var5,-1) AND V>Ref(V,-1),colorGold,colorBlack)));
HaClose = (O+H+L+C)/4;
HaOpen = AMA( Ref( HaClose, -1 ), 0.5 );
HaHigh = Max( H, Max( HaClose, HaOpen ) );
HaLow = Min( L, Min( HaClose, HaOpen ) );
HaClose = ( HaClose + HaOpen + HaHigh + HaLow )/4;
Plot( C, "Regular candles " + Name(), barcolor, styleCandle );


duration = 10000000;

LastClose= Ref(C,-1); 

if (Buy[BarCount-2]==True)    
{
PopupWindowEx( "ID:1", "Get Ready to BUY  \n"+Name() + "  "+ Interval(2)+" :  "+ " Last ="+LastClose  , "Buy Alert -", 1000, 100, 1 ) ; 
}
if (Short[BarCount-2]==True)
{
PopupWindowEx( "ID:2", "Get Ready to SHORT  \n"+Name() + "  "+ Interval(2) + "  :  "+ " Last ="+LastClose , "Short   Alert ", 1000, 1, 150 ) ;
}

_SECTION_BEGIN("Background text");
SetChartBkColor(colorBlack);
GraphXSpace=Param("GraphXSpace",10,-45,200,1);
C13=Param("fonts",20,10,30,1 );
C14=Param("left-right",2.1,1.0,5.0,0.1 );
C15=Param("up-down",12,1,20,1 );
Miny = Status("axisminy");
Maxy = Status("axismaxy");
lvb = Status("lastvisiblebar");
fvb = Status("firstvisiblebar");
pxwidth = Status("pxwidth");
pxheight = Status("pxheight");
GfxSetBkMode(transparent=1);
GfxSetOverlayMode(1);
GfxSelectFont("Candara", Status("pxheight")/C13 );
GfxSetTextAlign( 6 );
GfxSetTextColor( ColorRGB (217,217,213));
_SECTION_END();

_SECTION_BEGIN("BACKGROUD LTRS 1");
SetChartOptions(0,chartShowArrows|chartShowDates);
GfxSetOverlayMode(1);
GfxSetTextAlign( 6 );// center alignment
GfxSetTextColor( ParamColor("Text Color",colorSeaGreen));
GfxSetBkMode(0); // transparent
GfxSelectFont("arial narrow", Status("pxheight")/18);
_SECTION_END();

_SECTION_BEGIN("BACKGROUD LTRS 2");
GfxTextOut( Name(), Status("pxwidth")/2, Status("pxheight")/4.1);
GfxSetTextAlign( 6 );// center alignment
GfxSetTextColor( ParamColor("Text Color",colorDarkOliveGreen));
GfxSetBkMode(0); // transparent
GfxSelectFont("arial narrow", Status("pxheight")/28);


_SECTION_BEGIN("BB price chart");
 SetChartOptions(0,chartShowArrows|chartShowDates);
 Plot( Close, "Close", ParamColor("Color", colorLightBlue ), styleNoTitle | ParamStyle("Style") | GetPriceStyle() );

 P = ParamField("Price field",-1);
 Periods = Param("Periods", 20, 2, 300, 1 );
 Width = Param("Width", 2, 0, 10, 0.05 );
 Color = ParamColor("Color", colorCycle );
 Style = ParamStyle("Style");

 if( ParamToggle("Plot BB price chart", "No,Yes", 1 ) )
 Plot( BBandTop( P, Periods, Width ), "BBTop" + _PARAM_VALUES(), Color, Style );
 if( ParamToggle("Plot BB price chart", "No,Yes", 1 ) )
 Plot( BBandBot( P, Periods, Width ), "BBBot" + _PARAM_VALUES(), Color, Style );
 _SECTION_END();

_SECTION_BEGIN("PSAR");
Plot(C,"",1,128);
acc = Param("Acceleration", 0.04, 0, 1, 0.001 );
accm = Param("Max. acceleration", 0.4, 0, 1, 0.001 );
if( ParamToggle("Plot PSAR", "No,Yes", 1 ) )
Plot( SAR( acc, accm ), _DEFAULT_NAME(), ParamColor( "Color", colorGold ), ParamStyle("Style", styleDots | styleNoLine, maskDefault | styleDots | styleNoLine ) );
_SECTION_END();

_SECTION_BEGIN("SMA crossover 200 ");
P = ParamField("Price field",-1);
Periods = Param("Periods", 200, 2, 300, 1, 10 );
if( ParamToggle("Plot SMA cross over 200", "No,Yes", 1 ) )
Plot( MA( P, Periods ), _DEFAULT_NAME(), ParamColor( "Color", colorRed ) );
 _SECTION_END();

_SECTION_BEGIN("SMA crossover 100 ");
P = ParamField("Price field",-1);
Periods = Param("Periods", 100, 2, 300, 1, 10 );
if( ParamToggle("Plot SMA cross over 100", "No,Yes", 1 ) )
Plot( MA( P, Periods ), _DEFAULT_NAME(), ParamColor( "Color", colorSeaGreen )  );
 _SECTION_END();

_SECTION_BEGIN("SMA crossover 50 ");
P = ParamField("Price field",-1);
Periods = Param("Periods", 50, 2, 300, 1, 10 );
if( ParamToggle("Plot SMA crossover 100", "No,Yes", 1 ) )
Plot( MA( P, Periods ), _DEFAULT_NAME(), ParamColor( "Color", colorTan) );
 _SECTION_END();


//Magfied Market Price

FS=Param("Font Size",23,11,100,1);

GfxSelectFont("Times New Roman", FS, 700, True );

GfxSetBkMode( colorWhite );

GfxSetTextColor( ParamColor("Color",colorSeaGreen) );

Hor=Param("Horizontal Position",640,1,1000,1);

Ver=Param("Vertical Position",14,1,830,1);

GfxTextOut(""+C, Hor , Ver );

YC=TimeFrameGetPrice("C",inDaily,-1);

DD=Prec(C-YC,2);

xx=Prec((DD/YC)*100,2);

GfxSelectFont("Times New Roman", 14, 700, True );

GfxSetBkMode( colorBlack );

GfxSetTextColor(ParamColor("Color",colorYellow) );

GfxTextOut(""+DD+"  ("+xx+"%)", Hor , Ver+45 );

_SECTION_END();


_SECTION_BEGIN("BREAK OUTS");

//  ============== Standard Chart Code ============================
Code = "Modified @ FazalHaq";
SetFormulaName("Volume Breakouts");

//   ---------------  Controls for Chart Display  ----------------------------------
SetChartOptions(0, chartShowDates | chartWrapTitle);
if (ParamToggle("Tooltip shows", "All Values|Only Prices"))
{
  ToolTip = StrFormat("Open: %g\nHigh:  %g\nLow:   %g\nClose:  %g (%.1f%%) \nVolume: " + NumToStr(V, 1), O, H, L, C, SelectedValue(ROC(C, 1)));
}

space = Param("Space on Chart", 2,  - 15, 50, 1);
GraphXSpace = space;
SetChartBkColor(ParamColor("Background Color", colorBlack));

// =================   (with Lookback and Shift default set to his specs) =================

H0 = H;
L0 = L;
C0 = C;
O0 = O;

Lookback = Param("LookBack", 10, 10, 50, 1); // Default for interday commodity currency trading
shift = Param("Shift", 5, 1, 50, 1); // ?
x0 = LastValue(Cum(1));
x1 = x0 - shift;
H = Ref(H,  - shift + 1);
L = Ref(L,  - shift + 1);
H1 = LastValue(Ref(HHV(H, Lookback),  - 1));
L1 = LastValue(Ref(LLV(L, Lookback),  - 1));

if( ParamToggle("Plot BREAK OUTS", "No,Yes", 1 ) )
Plot(H1, "H1", colorSkyblue);
if( ParamToggle("Plot BREAK OUTS", "No,Yes", 1 ) )
Plot(L1, "L1", colorSkyblue);

H = H0;
L = L0;
C = C0;
O = O0;

up = Cross(H, H1)AND Cum(1) > x1;
dn = Cross(L1, L)AND Cum(1) > x1;

_SECTION_END();

_SECTION_BEGIN("HeikenAshiSmoothed");
GraphXSpace=2;
//p=45;
p = Param("p",70,2,100,1);

Om=DEMA(O,p);
hm=DEMA(H,p);
lm=DEMA(L,p);
Cm=DEMA(C,p);
HACLOSE=(Om+Hm+Lm+Cm)/4;
HaOpen = AMA( Ref( HaClose, -1), 1);
HaHigh = Max( Hm, Max( HaClose, HaOpen ) );
HaLow = Min( Lm, Min( HaClose, HaOpen ) );

Color=IIf(HaClose >= HaOpen,colorSeaGreen,ColorRGB( 205, 92, 92 ) );
if( ParamToggle("Plot Heikin-Ashi", "No,Yes", 0 ) )
PlotOHLC( HaOpen, HaOpen, HaClose, HaClose, "" + Name(), Color, styleCandle);
_SECTION_END();


_SECTION_BEGIN("TREND LINES");

/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    THIS SECTION DRAWS TD TREND LINES */

percent  = 0.01 * 1; /* Adjust this percent as necessary, I use .01 because
FOREX is a 0.0000 number */
firstpointL = 2;
firstpointH = 2;

y0=LastValue(Trough(L,percent,firstpointL));
y1=LastValue(Trough(Ref(L,-1),percent,1));

for( i = 1; i < BarCount AND y0 >= y1; i++ )
{
      
        firstpointL++;  
        y0=LastValue(Trough(L,percent,firstpointL));        
}

x0=BarCount - 1 - LastValue(TroughBars(L,percent,firstpointL));
x1=BarCount - 1 - LastValue(TroughBars(Ref(L,-1),percent,1));
LineL = LineArray( x0, y0, x1, y1, 1 );
/*
Plot(C, "C", colorBlack, styleCandle);
*/
if( ParamToggle("Plot TREND LINES", "No,Yes", 0 ) )
Plot( LineL, " Support Trend line", colorWhite,4 +8 );


yt0=LastValue(Peak(H,percent,firstpointH));
yt1=LastValue(Peak(Ref(H,-1),percent,1));

for(i = 1; i < BarCount AND yt0 <= yt1; i++ )
{
      
        firstpointH++;      
        yt0=LastValue(Peak(H,percent,firstpointH));
}
xt0=BarCount - 1 - LastValue(PeakBars(H,percent,firstpointH));
xt1=BarCount - 1 - LastValue(PeakBars(Ref(H,-1),percent,1));
LineH = LineArray( xt0, yt0, xt1, yt1, 1 );

if( ParamToggle("Plot TREND LINES", "No,Yes", 0 ) )
Plot( LineH, "Resistance Trend line", colorGold,4 + 8 );


/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/

_SECTION_END();

_SECTION_BEGIN("Fib Retracements");
    fibs = ParamToggle("Plot Fibs","Off|On",0);
    pctH = Param ("Pivot Hi %", 0.325,0.001,2.0,0.002);
    HiLB = Param ("Hi LookBack",1,1,BarCount-1,1);
    pctL = Param ("Pivot Lo %", 0.325,0.001,2.0,0.002);
    LoLB = Param ("Lo LookBack",1,1,BarCount-1,1);
    Back = Param ("Extend Left = 2",1,1,500,1);
    Fwd  = Param("Plot Forward", 0, 0, 500, 1);
    text = ParamToggle("Plot Text","Off|On",0);
    hts  = Param ("Text Shift", -33.5,-50,50,0.10);
    style =ParamStyle("Line Style",styleLine,styleNoLabel);
x = BarIndex();
pRp  = PeakBars( H, pctH, 1) == 0;
yRp0 = SelectedValue(ValueWhen( pRp, H, HiLB));
xRp0 = SelectedValue(ValueWhen( pRp, x, HiLB));
pSp  = TroughBars( L, pctL, 1) == 0;
ySp0 = SelectedValue(ValueWhen( pSp, L, LoLB));
xSp0 = SelectedValue(ValueWhen( pSp, x, LoLB));
Delta = yRp0 - ySp0;

function fib(ret)
{
retval = (Delta * ret);
Fibval = IIf(ret < 1.0
AND xSp0 < xRp0, yRp0 - retval, IIf(ret < 1.0
AND xSp0 > xRp0, ySp0 + retval,IIf(ret > 1.0
AND xSp0 < xRp0, yRp0 - retval, IIf(ret > 1.0
AND xSp0 > xRp0, ySp0 + retval, Null))));
return FibVal;
}

x0 = Min(xSp0,xRp0)-Back;
x1 = (BarCount -1);
//////////////////////////////////////////////////////////////////
r236 = fib(0.236);  r236I = LastValue (r236,1);
r382 = fib(0.382);  r382I = LastValue (r382,1);
r050 = fib(0.50);       r050I = LastValue (r050,1);
r618 = fib(0.618);  r618I = LastValue (r618,1);
r786 = fib(0.786);  r786I = LastValue (r786,1);
e127 = fib(1.27);       e127I = LastValue (e127,1);
e162 = fib(1.62);       e162I = LastValue (e162,1);
e200 = fib(2.00);       e200I = LastValue (e200,1);
e262 = fib(2.62);       e262I = LastValue (e262,1);
e424 = fib(4.24);       e424I = LastValue (e424,1);
//////////////////////////////////////////////////////////////////
p00 = IIf(xSp0 > xRp0,ySp0,yRp0);    p00I = LastValue (p00,1);
p100 = IIf(xSp0 < xRp0,ySp0,yRp0);   p100I = LastValue (p100,1);
color00 =IIf(xSp0 > xRp0,colorLime,colorRed);
color100 =IIf(xSp0 < xRp0,colorLime,colorRed);
//////////////////////////////////////////////////////////////////
numbars = LastValue(Cum(Status("barvisible")));
fraction= IIf(StrRight(Name(),3) == "", 3.2, 3.2);
//////////////////////////////////////////////////////////////////
if(fibs==1)
{
Plot(LineArray(xRp0-Fwd,yRp0,x1,yRp0,Back),"PR",32,8|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(xSp0-Fwd,ySp0,x1,ySp0,Back),"PS",27,8|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r236,x1,r236,Back),"",45,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r382,x1,r382,Back),"",44,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r050,x1,r050,Back),"",41,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r618,x1,r618,Back),"",43,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,r786,x1,r786,Back),"",42,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e127,x1,e127,Back),"e127",47,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e162,x1,e162,Back),"e162",47,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e200,x1,e200,Back),"p200",47,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e262,x1,e262,Back),"p262",47,style|styleNoRescale,Null, Null,Fwd);
Plot(LineArray(x0-Fwd,e424,x1,e424,Back),"p424",25,style|styleNoRescale,Null, Null,Fwd);
}
//////////////////////////////////////////////////////////////////
if(text==1)
{
PlotText(" 0% = " + WriteVal(p00,fraction),     LastValue(BarIndex())-(numbars/hts), p00I  + 0.05, color00);
PlotText("23% = " + WriteVal(r236,fraction), LastValue(BarIndex())-(numbars/hts), r236I + 0.05, 45);
PlotText("38% = " + WriteVal(r382,fraction), LastValue(BarIndex())-(numbars/hts), r382I + 0.05, 44);
PlotText("50% = " + WriteVal(r050,fraction), LastValue(BarIndex())-(numbars/hts), r050I + 0.05, 41);
PlotText("62% = " + WriteVal(r618,fraction), LastValue(BarIndex())-(numbars/hts), r618I + 0.05, 43);
PlotText("78% = " + WriteVal(r786,fraction), LastValue(BarIndex())-(numbars/hts), r786I + 0.05, 42);
PlotText("100% = " + WriteVal(p100,fraction), LastValue(BarIndex())-(numbars/hts),p100I + 0.05, color100);
PlotText("127% = " + WriteVal(e127,fraction), LastValue(BarIndex())-(numbars/hts),e127I + 0.05, 47);
PlotText("162% = " + WriteVal(e162,fraction), LastValue(BarIndex())-(numbars/hts),e162I + 0.05, 47);
PlotText("200% = " + WriteVal(e200,fraction), LastValue(BarIndex())-(numbars/hts),e200I + 0.05, 47);
PlotText("262% = " + WriteVal(e262,fraction), LastValue(BarIndex())-(numbars/hts),e262I + 0.05, 47);
PlotText("424% = " + WriteVal(e424,fraction), LastValue(BarIndex())-(numbars/hts),e424I + 0.05, 25);
}
_SECTION_END();


_SECTION_BEGIN("Pivot Points,Daily,Monthly");

TimeFrameSet(inDaily);
DayH= LastValue(Ref(H,-1));
DayL= LastValue(Ref(L,-1));
DayC= LastValue(Ref(C,-1));
TimeFrameRestore();

//Daily
PP = (DayL + DayH + DayC)/3;
R1  =  (2 * PP) - DayL;
S1  =  (2 * PP)  - DayH;
R2  =  PP + (DayH - DayL);
S2  =  PP - (DayH - DayL);
R3 = DayH + 2*(PP - DayL);
S3 = DayL - 2*(DayH - PP);

TimeFrameSet(inMonthly);
MonthH= LastValue(Ref(H,-1));
MonthL= LastValue(Ref(L,-1));
MonthC= LastValue(Ref(C,-1));
TimeFrameRestore();

//Monthly
MPP = (MonthL + MonthH + MonthC)/3;
MR1  =  (2 * MPP) - MonthL;
MS1  =  (2 * MPP)  - MonthH;
MR2  =  MPP + (MonthH- MonthL);
MS2  =  MPP - (MonthH- MonthL);
MR3  =  MonthH + 2*(MPP - MonthL);
MS3 =   MonthL - 2*(MonthH- MPP);

SHOWDPIVOTS = ParamToggle("Daily Pivots", "No|Yes",0);
SHOWMPIVOTS = ParamToggle("Monthly Pivots","No|Yes",0);
SHOW3 = ParamToggle("3rd Line", "No|Yes",0);

  
for (i=BarCount-2;i>(BarCount-13);i--)//set the last bars to the final PP value
{
    PP[i] = PP[BarCount-1];
    R1[i] = R1[BarCount-1];
    R2[i] = R2[BarCount-1];
    S1[i] = S1[BarCount-1];
    S2[i] = S2[BarCount-1];

    ColorG[i] = colorGreen;
    ColorB[i] = colorBlue;
    ColorR[i] = colorRed;
}

//
// Conceal all but the trailing portion of the line
//
for (i=0;i<BarCount-15;i++) //hide the line except most recent 15 bars
{
    ColorR[i] = ColorG[i] = ColorB[i] = colorDarkGrey;
}


if (SHOWDPIVOTS) {
Plot(R2, "R2",ColorG);
Plot(R1, "R1",ColorG);
Plot(PP, "PP",ColorB);
Plot(S1, "S1",ColorR);
Plot(S2, "S2",ColorR);
}

if (SHOWDPIVOTS & SHOW3)
{
        Plot(S3, "S3",ColorR);
        Plot(R3, "R3",ColorG);
}



if (SHOWMPIVOTS) {
Plot(MPP, "MPP",ColorB);
Plot(MR1, "MR1",ColorG);
Plot(MS1, "MS1",ColorR);
Plot(MS2, "MS2",ColorR);
Plot(MR2, "MR2",ColorG);
}

if (SHOWMPIVOTS & SHOW3)
{
        Plot(MR3, "MR3",ColorG);
        Plot(MS3, "MS3",ColorR);
}

_SECTION_END();

 _SECTION_BEGIN("Elliot wave");
 X=BarIndex();
 p=Param("p",5,5,30,1);
 z=Zig(C,p);Plot(C,"C",2,64);
CONDP=PeakBars(C,P)==0;SP=Cum(CONDP);
 EP1=ValueWhen(CONDP,C,1);TP1=ValueWhen(CONDP,X,1);
 EP2=ValueWhen(CONDP,C,2);TP2=ValueWhen(CONDP,X,2);
 EP3=ValueWhen(CONDP,C,3);TP3=ValueWhen(CONDP,X,3);
 EP4=ValueWhen(CONDP,C,4);TP4=ValueWhen(CONDP,X,4);
 CONDT=TroughBars(C,P)==0;ST=Cum(CONDT);
 ET1=ValueWhen(CONDT,C,1);TT1=ValueWhen(CONDT,X,1);
 ET2=ValueWhen(CONDT,C,2);TT2=ValueWhen(CONDT,X,2);
 ET3=ValueWhen(CONDT,C,3);TT3=ValueWhen(CONDT,X,3);
 ET4=ValueWhen(CONDT,C,4);TT4=ValueWhen(CONDT,X,4);
 ET5=ValueWhen(CONDT,C,5);TT5=ValueWhen(CONDT,X,5);

 // EW definition
 EW8=EP3>EP4 AND EP2>EP3 AND EP2>EP1 AND ET4>ET5 AND ET3>ET2 AND
 ET2>ET1 AND ET3>ET4 AND ET4>ET5 AND CONDT;
 COLOR=colorWhite;

 PlotShapes(shapeDigit8*EW8,color);
 G=Cum(CONDP OR CONDT);
 GEW=SelectedValue(ValueWhen(EW8,G));
 for(n=1;n<=9;n++)
 {
 PlotShapes((49-(2*n-(n%2)))*(G==GEW-n AND (n%2)*CONDP+(-1+n%2)
 *CONDT),Color);
 }
 Plot(EW8,"",colorRed,2+styleOwnScale);
 if( ParamToggle("Plot Elliot Wave", "No,Yes", 0) )
 Plot(z,"",colorPink );
 Filter=EW8;// explore for all quotations
 AddColumn(C,"C");
 GraphXSpace=8;
 _SECTION_END();

_SECTION_BEGIN("Title");

DODay = TimeFrameGetPrice("O", inDaily);
DHiDay = TimeFrameGetPrice("H", inDaily);
DLoDay = TimeFrameGetPrice("L", inDaily);

Title = EncodeColor(colorWhite)+""+EncodeColor(colorWhite)+ Name() + ", " + Interval(2) + ", " + Date() +
EncodeColor(colorWhite)   +  "\nO " + EncodeColor(colorWhite) + O +

 ",   H :  "   + H +
 ",   L  :  " + L +
 ",   C  :  "  + C +
EncodeColor(colorYellow)+ "\nDay-Open : " +DODay + "  Day-High : " +DHiDay + "  Day-Low : " + DLoDay ;
_SECTION_END();

_SECTION_BEGIN("Linear Reg Channel");
//Plot(Close, "", 55, GetPriceStyle());
P        = ParamField("Price field", -1);
Daysback = Param("Period for Linear Regression Channel", 50, 1, 300, 1);
SDP1     = Param("Standard Deviation 1", 1.0, 0, 6, 0.05);
SDP2     = Param("Standard Deviation 2", 2.0, 0, 6, 0.05);
SDP3     = Param("Standard Deviation 3", 3.0, 0, 6, 0.05);
ext      = Param("extend Linear Regression Channel", 15, 0, 50, 1);
shift    = Param("Look back period", 0, 0, 240, 1);
Collg    = ParamColor("Color Linear Reg Line", colorRed);
Colsd1   = ParamColor("Color StDev 1", colorBlue);
Colsd2   = ParamColor("Color StDev 2", colorLime);
Colsd3   = ParamColor("Color StDev 3", colorGold);
SDP1     = SDP1/2;
SDP2     = SDP2/2;
SDP3     = SDP3/2;
pds      = Daysback;
x        = BarIndex() + 1;
sx       = SelectedValue(x)-shift;
aa       = SelectedValue(Ref(LinRegIntercept(P, pds), -shift));
bb       = SelectedValue(Ref(LinRegSlope(P, pds), -shift));
StDev0   = StDev(P, pds);
fd1      = SelectedValue(Ref(SDP1 * StDev0, -shift) );
fd2      = SelectedValue(Ref(SDP2 * StDev0, -shift) );
fd3      = SelectedValue(Ref(SDP3 * StDev0, -shift) );
ys       = SelectedValue(ValueWhen(x, aa, 1));
yi       = SelectedValue(ValueWhen(x, bb, 1));
xs       = sx - pds;
d        = ext;//Shift Line Right
xe       = xs + pds + d;
ye       = ys + yi * (xe - xs);
sty      = 1|32|2048;
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys,xe-d,ye,1),"",Collg,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys-fd1,xe-d,ye-fd1,1),"",Colsd1,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys+fd1,xe-d,ye+fd1,1),"",Colsd1,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys-fd2,xe-d,ye-fd2,1),"",Colsd2,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys+fd2,xe-d,ye+fd2,1),"",Colsd2,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys-fd3,xe-d,ye-fd3,1),"",Colsd3,sty,0,0,d);
if( ParamToggle("Plot Linear Reg Channel", "No,Yes", 0 ) )
Plot(LineArray(xs-d,ys+fd3,xe-d,ye+fd3,1),"",Colsd3,sty,0,0,d);
_SECTION_END();


_SECTION_BEGIN("Fazal's Pivot Points");

//---------------------------------------------------------------------------
// This section gets whether they want pivot level for intraday or thier eod
//---------------------------------------------------------------------------

_N(ioreod =ParamList("Pivot Levels for ",  "Intraday|EOD"));

if (ioreod=="Intraday")
    {
        yh = TimeFrameGetPrice( "H", inDaily, -1 );
        yl = TimeFrameGetPrice( "L", inDaily, -1 );
        yc = TimeFrameGetPrice( "C", inDaily, -1 );
    }
else
    {
        yh = TimeFrameGetPrice( "H", inDaily, 0 );
        yl = TimeFrameGetPrice( "L", inDaily, 0 );
        yc = TimeFrameGetPrice( "C", inDaily, 0 );
    }

//---------------------------------------------------------------------------
//                         To calculate the Pivot Levels
//---------------------------------------------------------------------------

to = TimeFrameGetPrice( "O", inDaily, 0 );
pivot = (yh + yl + yc) / 3;
range = yh - yl;
_N(pist =ParamList("Select Pivot Type ", "Classical Pivot|Woodie Pivot|Caramilla Pivot|Fibonacci Pivot"));

if (pist =="Classical Pivot" )
    {
        r1 = (2 * pivot) - yl ;
        s1 = (2 * pivot) - yh ;
        r2 = pivot - s1 + r1;
        s2 = pivot - (r1 - s1) ;
        r3 = 2 * (pivot - yl) + yh ;
        s3 = yl - (2 * (yh - pivot));
    }

else if(pist =="Woodie Pivot" )
    {
        pivot = (yh + yl + yc + to) / 4;
        r1 = (2 * pivot) - yl;
        r2 = pivot + range;
        r3 = yh + 2 * (pivot - yl);
        r4 = r3 + range;
        s1 = (2 * pivot) - yh;
        s2 = pivot - range;
        s3 = yl - 2 * (yh - pivot);
        s4 = S3 - range;
    }

else if(pist =="Caramilla Pivot" )
    {
        r4 = yc + range * 1.1/2;
        r3 = yc + range * 1.1/4;
        r2 = yc + range * 1.1/6;
        r1 = yc + range * 1.1/12;
        s1 = yc - range * 1.1/12;
        s2 = yc - range * 1.1/6;
        s3 = yc - range * 1.1/4;
        s4 = yc - range * 1.1/2;
    }

else
    {
        r3 = pivot + 1.000 * (yh - yl);
        r2 = pivot + 0.618 * (yh - yl);
        r1 = pivot + 0.382 * (yh - yl);
        s1 = pivot - 0.382 * (yh - yl);
        s2 = pivot - 0.618 * (yh - yl);
        s3 = pivot - 1.000 * (yh - yl);
    }

//---------------------------------------------------------------------------
//                         To Plot Pivot Levels in the screen
//---------------------------------------------------------------------------

_N(dsr =ParamList("Draw Intraday Pivot Levels ",  "None|Both|Support|Resistance"));

if (dsr =="Support" OR  dsr == "Both")
{
    Plot(pivot, "\n Pivot - ",colorWhite,1);
    Plot(r1, "Resistance 1 - ",colorYellow,1);
    Plot(r2, "Resistance 2 - ",colorYellow,1);
    Plot(r3, "Resistance 3 - ",colorYellow,1);
    Plot((pivot+r1)/2, "Mid Value of R1 & Pivot  ",colorYellow,1);
    Plot((r3+r2)/2, "Mid Value of R2 & R3 -  ",colorYellow,1);
    Plot((r1+r2)/2, "Mid Value of R1 & R2 - ",colorYellow,1);
}

if( dsr == "Resistance" OR  dsr == "Both")
{
    Plot(pivot, "\n Pivot - ",colorWhite,1);
    Plot(s3, "Support 2 - ",colorYellow,1);
    Plot(s2, "Support 2 - ",colorYellow,1);
    Plot(s1, "Support 1 - ",colorYellow,1);
    Plot((s3+s2)/2, "Mid Value of S2 & S3 ",colorYellow,1);
    Plot((s1+s2)/2, "Mid Value of S1 & S2 -  ",colorYellow,1);
    Plot((pivot+s1)/2, "Mid Value of S1 & Pivot  ",colorYellow,1);
}

//---------------------------------------------------------------------------
//                 Printing the pivot level in interpretation window
//---------------------------------------------------------------------------


printf(Name()+ "\n\nResistance - 3  |  %g\nResistance - 2  |  %g\nResistance - 1  |  %g\n" +
"Pivot                |  %g\nSupport - 1      |  %g\nSupport - 2      |  %g\nSupport - 3      |  %g",
r3,r2,r1,pivot,s1,s2,s3);


//---------------------------------------------------------------------------
//                         This section is for Exploration
//---------------------------------------------------------------------------

Filter = 1;
AddColumn(r3,"Resistance 3");
AddColumn(r2,"Resistance 2");
AddColumn(r1,"Resistance 1");
AddColumn(Pivot,"Pivot");
AddColumn(s1,"Support 1");
AddColumn(s2,"Support 2");
AddColumn(s3,"Support 3");

//---------------------------------------------------------------------------
//                         Add Pivot levels along with the title
//---------------------------------------------------------------------------

_N(Title = EncodeColor(colorLime)+ StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} Open %g, Hi %g, Lo %g, Close %g(%.1f%%)\n"+
    EncodeColor(colorRed)+"Resistance =  %g || Resistance = %g || Resistance = %g || "+
    EncodeColor(colorWhite)+" Pivot = %g"+
    EncodeColor(colorGreen)+"\nSupport = %g || Support = %g ||::::: Support 3 -=- %g\n ",
 O, H, L, C,SelectedValue( ROC( C, 1 ) ),r3,r2,r1,pivot,s1,s2,s3));

//---------------------------------------------------------------------------
//                                 End of Pivot Point
//---------------------------------------------------------------------------

_SECTION_END();